Discover free MLO files, scripts, repair tools, and firmware downloads — 100% free and regularly updated.

Samsung Galaxy A52 charging board resistor removal fix diagram

Breaking

Post Top Ad

Your Ad Spot

iPhone 12 Pro Touch Not Working

iPhone 12 Pro Touch Not Working? The Ultimate Capacitor Fix Guide iPhone 12 Pro Touch Not Working Guide Banner - A stylized, round image representing the device.

iPhone 12 Pro Touch Not Working? The Ultimate Capacitor Fix Guide

Is your iPhone 12 Pro's screen completely unresponsive to touch? Are you tired of trying software fixes that don't work? We're about to reveal the hidden secrets behind this common problem and show you the ultimate, next-gen hardware solution. This diagram holds the key to fixing your device and getting your touch screen working perfectly again!

The Problem: A Hidden Short on the Logic Board

Many iPhone 12 Pro users experience a frustrating issue where the touch screen suddenly stops responding, even after a screen replacement. This is often not a screen problem but a fault on the logic board itself, typically caused by a shorted capacitor near the display connector. This simple guide will help you identify and resolve that short.

Step-by-Step Capacitor Solution Guide

This repair requires microsoldering skills and a multimeter to check for the short. Please proceed with extreme caution. The diagram below shows the exact location of the problematic capacitor.

iPhone 12 Pro Touch Repair Diagram - A detailed microsoldering diagram showing the exact capacitor to check and remove on the motherboard to fix the touch issue.
  1. Open the iPhone: Carefully open the device and disconnect the battery and display connectors. Remove the logic board.
  2. Locate the Capacitor: Use the provided diagram to find the specific capacitor located near the display connector on the logic board.
  3. Check for a Short: With your multimeter, check the capacitor for a short to ground. If you detect a short, this is likely the cause of your touch issue.
  4. Remove the Shorted Capacitor: Carefully remove the capacitor using a heat gun and tweezers. A new capacitor is not always required, as removing the short can be enough to restore functionality.
  5. Reassemble and Test: Once the capacitor is removed, reassemble the phone and test the touch screen. It should now be fully responsive.

This is a powerful and proven technique for fixing a very specific hardware fault. By addressing the root cause, you save time and money on unnecessary screen replacements.

Looking for More Expert Fixes?

If you found this guide helpful, you'll love the other hardware and software repair solutions on our blog. We're dedicated to empowering you with the knowledge to fix your own devices. Join our community of repair experts!

Visit Our Blog for More Repair Guides!

This guide is provided for educational purposes based on solutions developed by the community. A big thank you to the original source, gsm4files.com, for their valuable contribution to the mobile repair community.

Post Top Ad

Your Ad Spot